The Joys of Travel...

Friday night, returning from Corpus Christi, Texas, to Huntsville was an adventure.  My 6:00 PM departure flight from Corpus to Dallas was delayed 2 hours.  I had noticed a scheduled 7:30 flight, so I asked if it might be possible to get a seat on that flight.  I got the last available seat and my bag was transferred to that flight at my request.

The 7:30 flight departed around 8:00 PM and at that time, the plane that would eventually service the "earlier" flight had not yet left Dallas to go to Corpus Christi.  My new flight got into DFW at about 9:26.  I was sure I had missed my 9:30 connecting flight from Dallas to Huntsville.  Nonetheless, I proceeded to my departure gate (naturally, in a different terminal.  I arrived at that gate to find people boarding the plane.  I got in line.  Halleluia!  I might yet get home!

When I gave the attendant my boarding pass, she notified me that I had already been rescheduled for a morning flight because the airline assumed that I could not make my connection.  She was, however, able to give me a window seat with no one next to me.  We sat in a very hot airplane for an hour waiting for a flight crew to arrive.  Finally got off the ground an hour and a half late.  Got to bed about 2:00 AM.  Whatever happened to clean, on-time, efficient train service?

Milestones...

Today is the 120th anniversary of the birth of my father, Harold Richard Mead.

Thoughts on the Maloy...

USS Maloy (DE-791)

The recent 70th anniversary of D-Day brought to mind the last ship that I served on, the USS Maloy (DE-791).  She was a Buckley class destroyer escort, the last of her type in commission.  And the Maloy was present on D-Day.  According to a letter written by Maloy sailor Kenneth Surprise to his parents in Lowell, Indiana, "During the initial assault on France, the Maloy carried the flag of Commodore Campbell D. Edgar, USN, Cazenovia, New York, who commanded an important phase of the invasion."  During the months leading up to D-Day, there are extensive archives that describe Maloy's role as a squadron flagship for a PT boat squadron.  I suspect that Commodore Edgar was a PT boat squadron commander, embarked on Maloy as his flagship.  According to Wikipedia, "On D-Day, 6 June 1944, Maloy supported operations off Omaha Beach in this hard-fought assault where naval gunfire support played a decisive role in victory."

Seaman Surprise further wrote, "We got off to a good start on D Day by knocking down a JU88 with our guns," he said, "and since then we've seen plenty of action!"   While on patrol off the Nazi-held Channel Islands, the Maloy came under the fire of heavy shore guns.  Although the German gunners fired 38 rounds at the vessel, she maneuvered too quickly and the heavy shells splashed harmlessly in the sea nearby.  On another action, Surprise said, his ship went in close to one of the islands and again the shore emplacements opened up on her.

  

"Their first salvo straddled us, showering shrapnel along our starboard side and hitting some depth charges," he related. "It was close enough for me!"

Later the Maloy stood off St. Malo, France, within sight of the bombing and subsequent surrender of Cezambre, a fortified island which held out long after German forces on the mainland gave up.

"That was some show!" Surprise declared.

I reported aboard Maloy nearl 20 years after these events.  There was a plaque in the passageway aft of the officers mess recognizing Maloy for her D-Day service.  It's hard to imagine that she was one of over 5,000 vessels that took part in that portentous event.  I once rode the City of Richmond overnight ferry that was part of the Baltimore Steam Packet Line, running from Baltimore to Norfolk.  That ferry boat had a plaque commemorating her participation on the D-Day armada!  The world will never again witness such a spectacular enterprise.

Yesterday, my Google Alert informed me that a new Web content had been detected in which the term "USS Maloy" was present.  I hope you find the following video as interesting as I did.

A Saturday Excursion...

Yesterday was the occasion of the 10th Annual Cigar Box Guitar Festival in Huntsville, AL.  It is held at Lowe Mill, a century-old cotton mill that houses the Flying Monkey Arts Center.  Several years ago I built a cigar box guitar and I have a long-standing interest in these unique instruments.

My banjo-building buddy, Clint Rankin, and his wife Sarah, had expressed an interest in the event and we agreed to meet there.  As I stepped out of my truck, I spotted an amazing array of food trucks.

I passed through "Food Truck Alley" and met up with the Rankins near the stage, which is set up on the sheltered loading dock of the old mill.

The stage area on the old loading dock

We listened for a while and then went into the air conditioned mill to dine at the "Happy Tummy."  Then we wandered through the cavernous building which is now a haven for dozens of art galleries, artists, craft shops, and other creative outlets.  We proceeded to the second floor, where there was to be a guitar-building workshop.  The next workshop was scheduled for 4:00 PM and it was only 2:00.  We continued to wander.  The sights were quite varied.

One of the big surprises for me was the number of vendors selling cigar box guitars.

By about 4:00 PM, it was just plain hot.  The Rankins and I bid adieu and headed home, after a delightful afternoon. 

The Shady Boys Take a Ride!

The entire Shady gang poses in front of their chariot

The Experimental Aircraft Association, headquartered in Oshkosh, Wisconsin, is the proud owner of one of the few remaining Ford Tri-Motor aircraft.  It goes on an annual tour of the U.S,. taking passengers up wherever it stops.  As the EAA Website describes this plane,

"From 1926 through 1933, Ford Motor Company built 199 Tri-Motors. EAA’s model 4-AT-E was the 146th off Ford’s innovative assembly line and first flew on August 21, 1929. It was sold to Pitcairn Aviation’s passenger division, Eastern Air Transport, whose paint scheme is replicated on EAA’s Tri-Motor. This is why EAA’s Ford resides in the Pitcairn Hangar at Pioneer Airport in Oshkosh, Wisconsin, when not touring the U.S. Eastern Air Transport later became Eastern Airlines.

In 1930, the Tri-Motor (NC8407) was leased to Cubana Airlines, where it inaugurated air service between Havana and Santiago de Cuba. The airplane was later flown by the government of the Dominican Republic.

EAA’s Ford Tri-Motor returned to the U.S. in 1949 for barnstorming use. In 1950, it was moved from Miami to Phoenix and was refitted with more powerful engines for use as a crop duster. With two 450 HP engines and one 550 HP engine, it became the most powerful Model 4-AT ever flown. In 1955, it was moved to Idaho and fitted with two 275-gallon tanks and bomb doors for use as a borate bomber in aerial firefighting. Then in 1958, it was further modified for use by smoke jumpers.

After working for a variety of crop spraying businesses, EAA’s Tri-Motor moved to Lawrence, Kansas, in 1964, where its new owner flew barnstorming tours. During this period it had a variety of roles, including serving as the primary setting for the Jerry Lewis comedy, The Family Jewels.

In 1973, the aircraft was still being used for air show rides, including an EAA chapter’s fly-in at Burlington, Wisconsin. While at the 1973 fly-in, a severe thunderstorm ripped the plane from its tie-downs, lifted it 50 feet into the air, and smashed it to the ground on its back. EAA subsequently purchased the wreckage.

After an arduous, 12-year restoration process by EAA staff, volunteers, and Ford Tri-Motor operators nationwide, the old Tri-Motor took to the air once again, where it had its official re-debut at the 1985 EAA Fly-In Convention in Oshkosh.

It was displayed in the EAA AirVenture Museum until 1991 when it returned to its former role of delighting passengers on its annual tour across the U.S."

This weekend, the plane was in Huntsville, at the executive airport in Meridianville.  I heard from my friends, Dan, Deron, and Daniel Shady.  All three generations of the Shadys have now flown in a Ford Tri-Motor!  What an experience!  I can't wait to hear the details...

An Important Event for Railroad Fans...

One of the Big Boys in action

I grew up in Schenectady, New York.  When I was a child, Schenectady declared itself to be "the City that Lights and Hauls the World."  This was because it was the home to the main plant of the General Electric Company (GE) and the main plant of the American Locomotive Company (ALCO).  Throughout World War II, it was a bustling place, as machinery, tanks, guns, and locomotives were produced at record rates.  Among the most spectacular products to be produced in my home town were the locomotives numbered 4000 through 4024 built for the Union Pacific Railroad.  These were the largest steam locomotives ever built and earned the nickname "Big Boys."  

ALCO built 20 of these giants in 1941 and another 5 in 1944.  Each locomotive connected to its gigantic tender weighed 1.2 million pounds!
The Big Boys last saw service in July, 1959.  The UP kept them ready for service until 1962, at which time they began scrapping or giving them to museums.  Fortunately, because of their unique place in railroading history, lots of museums wanted one.  Remarkably, of the 25 locomotives built, eight still survive.  Until recently, they were located at:

4004: Holliday Park, Cheyenne, Wyoming

4005: Forney Transportation Museum, Denver, Colorado

4006: Museum of Transportation, St. Louis, Missouri

4012: Steamtown National Historic Site, Scranton, Pennsylvania 

4014: RailGiants Train Museum, Fairplex, Pomona, California 

4017: National Railroad Museum, Green Bay, Wisconsin

4018: Museum of the American Railroad, sco, Texas

4023: Kenefick Park, Omaha, Nebraska

Union Pacific had developed the "Challenger" locomotive to pull long freight trains over the Wasatch Mountains.  However, the climb eastward from Ogden, Utah into the Wasatch Range reached 1.14%.grade, and the railroad had to double up it's locomotives to pull sizeable trains over that grade.  Their solution was to acquire larger engines that weighed more, had more power, and sufficient traction to be used solo over these mountains.  The Big Boys met that challenge.  

The locomotives had a so-called 4-8-8-4 configuration.  A heavy 4-wheeled "truck" guides the front of the locomotive.  It is followed by two sets of eight 68-inch diameter driving wheels.  Each set of eight has its own pistons and power cylinders.  And these wheels are able to pivot under the locomotive frame in order to negotiate curved track.  Finally, there is another hefty 4-wheel truck that supports the mammoth firebox, made even larger by UP's need to burn low-grade coal that came from their mines.  With their tenders, each of the Big Boys was just shy of 133 feet in length!  A most impressive sight when underway pulling a 600-car freight train.

A couple of years ago, the Union Pacific decided they would re-acquire one of the Big Boys and restore it as part of their corporate steam restoration and preservation program.  They negotiated a deal with the RailGiants Museum in Pomona to get 4014 in return for some other locomotives.

Recently, after several months of meticulous preparation, Big Boy 4014 left Colton, California under tow by three modern diesel locomotives (one of which bore the number 4014) and proceeded to Cheyenne, Wyoming, where it will receive the full restoration treatment.  4014 will roll again under its own incredible power!  I couldn't be happier.

Further Speedster Progress...

A couple of years ago, I posted some pictures describing my friend Dan building a Model T Ford speedster with his grandson Daniel.  At that time, I showed a couple progress pictures with the promise of more to come.  At that time, in 2012, the "buck" was still under construction.

Grandpa

Grandson

Much has transpired since then.  The buck got finished, but the wheel placement didn't look quite right.  Dan moved the rear axle a few inches.  Then the cockpit seemed a little small so the firewall was slightly relocated.  It took a while for the overall design to settle down.  Now that the design has stabilized, we;re into the metal forming phase.  And Dan is a master metal former.  Here's what the car looks like today: